Name : Apollon Coin (XAP) | Website : https://apollon.one
• Apollon Masternode Setup Guide
This guide is to show you how to setup a Cold node. Never ever run a so called Hot node. Hot nodes hold the collateral coins in their local wallet. If an attacker manages to access the system, they will be able to grab all your coins very easily. All masternodes guides on this site show you how to run Cold nodes. Cold nodes do not hold any coins, they are all in your local wallet. This means the masternode itself doesn't hold any coins.
• Choose A VPS for your Masternode
If you are looking for a reliable hoster, I suggest using Vultr VPS. It is so easy to use them that a how to on getting a VPS up with them isn't really needed. If you click the below banner it will take you there. The link is a referral link and if you SignUp via it, you will Get $10 Credit for Free and also you will support MNGuide.online to maintain and expand the infrastructure.
For demo purpose, I’m going to use Vultr VPS and full disclosure:
I. Deploy New Server
II. Select Server Location
III. Select Server Type: Ubuntu 16.04
IV. Select Server Size: 1CPU - 1024MB Memory. (Some MN's need 2048MN Memory)
V. Type Host Name (MNx), Server Qty and Deploy now
VI. You will get a confirmation email once your VPS activated.
Save your VPS IP, Username and Password from Control Panel in notepad for further steps.
Just to be sure you understand what needs to be done first:
1. Get a VPS up and running.
2. Have a local wallet that is also fully synced.
3. Have the correct amount of coins you need + some spare coins for TX fees.
This guide assumes that now you have VPS Server and your wallet is fully synced also have Masternode Collateral Amount.
Notes: Things IN CAPTIAL have to be replaced by you with the correct things. (if any)
Commands to copy and paste are in grey box.
LOCAL means your desktop wallet, REMOTE means the VPS.
We setup 1 masternode, if you want to setup more, you just have to rinse and repeat the steps.
You can easy get lost with all the stuff you have to copy and paste.
so i suggest you use below skeleton in your desktop notepad to do work easily:
Label: * YOUR ADDRESS LABEL * VPS IP: * YOUR VPS IP ADDRESS * Collateral Address: * YOUR COLLATERAL ADDRESS * Masternode Private Key: * YOUR MASTERNODE KEY * Transaction ID : * YOUR TX ID * Transaction Index : * TX INDEX * MN conf line: * MN1 YOUR_VPS_IP_ADDRESS:12218 MASTERNODE_PRIV_KEY TX_ID TX_INDEX *
You can copy it as many times as needed and fill the data in you collect during the progress.
• Collateral Sending from Apollon Wallet
Open your wallet and go to:
Settings -> Options -> Wallet -> check: Show Masternode Tab
Also, check Activate Coincontrol Features.
You will need to restart the wallet.
I. Have a local wallet that is also fully synced.
II. Click on Tools, then Debug console
III. You will find the command line at the bottom of the console
Enter the following command and press Enter.
You will see a long string of numbers and letters.
Please copy/paste this string to the notepad file on your Desktop (Masternode Private Key). This is the key you will need to verify your Masternode later in the process.
Enter the following command and press Enter. This will generate your new Masternode's receiving address
The generated address will now be labeled as MN1. Please copy/paste this string to the notepad file on your Desktop (label section). This address will be the one that you will send your 25,000 XAP to, and the one where all future payments will go.
If you want to setup more masternodes just repeat the steps so you end up with several addresses for the total number of nodes you wish to setup. Example: For 10 nodes you will need 10 addresses, label them all.
IV. Send 25,000 XAP as Collateral to your "mn1" address
From wherever you currently hold your 25,000 XAP (exchange, another Apollon wallet, even a different address in the same wallet), please send your XAP to your new "mn1" Masternode receiving address in your wallet.
IMPORTANT: You must send EXACTLY 25,000 XAP to your "mn1" address, no more, no less, to be eligible to run a Masternode!
Once you have initiated the transaction, you must wait for 15 confirmations so your address is eligible to be associated with your new Masternode. This usually takes about 20-30 minutes on average. While Waiting for the Collateral to get 15 confirmations, do VPS section below.
• Apollon Masternode VPS Installation
V. Download PuTTY and Fill your VPS Details to Connect to the VPS
Download PuTTY to connect to the server. Go to the PuTTY Download Page and select the appropriate MSI installer for your system. On Mac or Linux you can ssh directly from the terminal – simply type ssh [email protected]<server_ip> and enter your password when prompted.
PuTTY will be used to connect via SSH to systems.
Double-click the downloaded file to install PuTTY, then run the app from your Start menu. Enter the IP address of your VPS in the Host Name field and click Open. (copy/paste from email)
VI. Fill that user and password to PuTTY
Copy the default password from your VPS (Vultr) Provider sent you in email and right-click
inside the PuTTY window / press Enter
TIP : Right-clicking is how you paste into a PuTTY console window.
When you right-click paste, your password won’t be visible in the window.
Just trust that it pasted and hit enter.
Enter the following commands EXACTLY (in this order) to set up your firewall:
Please note: Make sure you enter the code in this order! If you do not, the program will not work! If need be you can disable your firewall by entering (as root): ufw disable.
Now we will configure the firewall to only allow ports 22 for SSH and for the masternode
sudo ufw allow ssh/tcp sudo ufw limit ssh/tcp sudo ufw allow 12218/tcp sudo ufw logging on sudo ufw enable sudo reboot
After a few minutes connect back with Putty and check the status of the firewall
sudo ufw status
You will see a message saying that your ufw status is active.
Congratulations, you now have a firewall!
VII. Apollon VPS remote wallet install, enter the following commands:
Install Apollon from the GitHub repository:
wget -N https://raw.githubusercontent.com/zoldur/Apollon/master/apollon_install.sh bash apollon_install.sh
Your system is now installing XAP node and is busy completing synchronisation with the blockchain. We now need to enter the masternode private key generated in the previous step.
Edit the configuration file using the following command:
Make sure to check your Masternode Privkey matches with your key in notepad file. (masternodeprivkey is the value you got from “masternode genkey” in debug window)
Press Ctrl + X to close the editor and Y and Enter save the file.
to exit the editor press
Use following command to confirm blockchain sync
./apollon-cli mnsync status
VIII. Get the info for your Masternode
Go to your Apollon Wallet
MENU : Tools / Debug console
In the debug console type :
It will display your Transaction ID (TX_ID) and Transaction Index
(TX_Index). The outputs will look something like this:
#Respond: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" : "0",
# Your TXID Should be : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# Your TXIndex Should be: 0
Copy and paste the outputs into your temporary notepad file (TX_ID and TX_Index).
IX. Setup Masternode Configuration File
MENU : Tools > Open Masternode Configuration File
You will see an example of the Masternode configuration line. Leave it there.
On a new line, copy/paste all the info you’ve gathered so far in this format:
MNx Your_VPS_IP_Address:12218 Masternode_Priv_Key TX_ID TX_Index
Save & Close Masternode Configuration File.
TIP : To run more than one Masternode, add a new line for each one like this.
MN1 Your_VPS_IP_Address:12218 Masternode_Priv_Key TX_ID TX_Index MN2 Your_VPS_IP_Address:12218 Masternode_Priv_Key TX_ID TX_Index
X. Start your Masternode in your Xavander Wallet
MENU : Masternodes
CLICK : ‘Start Missing’ -OR- Select new Masternode and click ‘Start Alias’
You should see : “MNx successfully started.”
TIP : Do not restart any masternodes you already have running or you will reset the rewards and end up waiting a long time to get paid again.
Congratulations, Your Masternode is now running successfully.
• XAP Masternode VPS Commands
To check block count
To check masternode sync status
./apollon-cli mnsync status
To check masternode status
./apollon-cli masternode status
If you get stuck, have questions or you just want to meet some other cool Apollon Community, check out the Discord
A donation will be appreciated. XAP Address : Ab249dG7Yvrx9UHf8yGZ1XBwaEB67qaZn7